Technical Information
Fastener Specific
Supply Source

Screw Heads

Fastener drives, threads and materials should be discussed in some depth before ordering screws, head choices should be included in that discussion. Socket cap screws can be produced with a range of different drives as can Pan and Countersunk heads.

  

Screw Head Types

Links

 Pan Head       Flat Head    Button Head      Countersunk Head    Raised countersunk Head     Oval Head   

Instrument Head   Bugle head    Round Socket Cap Head   Cheese Head    Fillister Head    Raised Cheese Head

Truss Head     Oven Head      Mushroom Head     Round Head      Square Head      Hexagon Head   Coach Head

Indented Hexagon Head    Hexagon Flange Head    Wafer Head    Binding Head    Tee Head   Cup square head  

 

.

SCREW HEADS

.

.

.

PAN HEAD SCREWS

PAN HEAD SCREWS

Slotted Pan head screws have a gently rounded top surface and curved sides with a flat bearing surface under the head. Pan head screws have generally replaced round, truss and binding heads.

Predominantly used on screw products where a flat bearing surface is required or on the other hand, where a countersunk is not required. The pan head is produced with a slotted drive or a number of Phillips drives and in Canada with the square drive.

Product

  

.

COUNTERSUNK HEAD SCREWS 

FLAT COUNTERSUNK HEAD

Countersunk head screws, called flat head screws in America; are the most popular screw head they appear on both taper cutting thread screws and on parallel threaded screws.

Flat-head (countersunk) screws have a head with a flat top and tapered under the base that allows it to be driven flush with the surface when installed in a countersunk screwed hole. This screw is most commonly used in furniture making where you want to be able to hide the screw head

Flat Head screws.

Countersunk head screws, called flat head screws in America if produced in Metric have a 90°angle but on larger sizes over M20, this can change to 60°. In the USA inch products have an 80 to 82° taper head angle and in the UK with inch products to British standards have an angle of  87-90°.  

.

.

BUTTON HEAD SCREWS

BUTTON HEAD  

Button socket screws have a spherical profile and offer a wider bearing surface, high tensile strength and a lower profile than socket cap screws.

They are used where high strength and a smooth profile is required particularly in the furniture industry. They are associated with parallel threads but can be provided on taper threads

.

.

.

RAISED OVAL HEAD SCREWS

OVAL HEAD

Raised countersunk head screws are called Oval head in the USA and sometimes described as instrument head 

Metric Oval is a rounded head with a 90° is a countersunk cone-shaped bearing surface. Preferred over a flat head in conical applications, or when a more decorative finished look is desired. The countersunk surface nests into mating countersunk applications. Inch Oval is the same as metric but with an 82-degree cone.

.

.

.

BUGLE HEAD SCREWS

BUGLE HEAD

Bugle Head screws are a countersunk head with a flat top and a concave under head countersunk. Generally, a Phillips drive not a pozi but can have a square drive in North America.

Designed specifically for use in drywall (plasterboard) installation because the screw distributes bearing stress over a wider area than flat heads.

.

SOCKET CAP HEAD SCREWS

SOCKET CAP HEAD

Cap head Socket cap screws are commonly used in machine parts, die fixtures, and clamping. The socket head enables driving where there is not sufficient space for external drives. Socket caps have a small cylindrical head with tall vertical sides. 

.

...

CHEESE HEAD SCREWS  

CHEESE HEAD SCREW

Cheese head screws have a smaller diameter than the round head. The smaller diameter head increases the pressure applied to the smaller area and can be assembled close to flanges and raised surfaces. used heavily in electrical applications.

FILLISTER HEAD SCREWS

The obsolete Fillister head is higher with a correspondingly deeper slot. Fillister heads can be shaved and drilled. 

.

TRUSS OVEN HEAD SCREWS

TRUSS OVEN HEAD 

Truss headed screws also go under the names of Oven head, or Stove head Has a low, large diameter rounded top with a flat bearing surface. Weaker than Pan heads or round heads but preferred in applications where minimal clearance exists above the head. Truss profile provides a trim finished appearance and can be used to cover large clearance holes in sheet metal 

.

.

.

MUSHROOM 

MUSHROOM ROOFING HEAD

Mushroom head screws are also called roofing bolts. They are very similar to the Truss head but with a cross drive on the head. The configuration has design weaknesses and as such the product is only used where strength is not a requirement.   

.

.

..

.

ROUND HEAD SCREWS

ROUND HEAD

Round heads were historically the preferred fastener design because they were easy to make; most historical rivets have been made with this head design. Today the round head is generally reserved for rivets, hammer drive and wood screws. Round heads have a high crown and deep recess but the head diameter is smaller than a pan. Round head screws are shaped almost like a one-third circle with a flat bottom. 

.

.

..

SQUARE HEAD SCREWS

SQUARE HEAD

Historical fasteners and replaced by hexagon and socket heads. The large square outer drive screw is still found in the construction industry and the small square on machine tools. The square head tool post screw has generally been replaced by the socket cap screw. 

.

.

.

.

HEXAGON AND INDENTED HEAD SCREWS

HEX HEAD

Hexagon heads are the most prolific head style originally with a simple hexagon drive for a spanner. The design has not stood still with the flange being added to reduce the need for washers and indented serration to the flange for locking the bolt bearing surface. To reduce weight and material costs many heads are indented and slots or pozi drive are forged in to enable easier maintenance. More detail        

.

.

.

.

WAFER HEAD SCREWS

WAFER HEAD

Wafer head screws are a countersunk head with a flat top surface and a cone-shaped bearing surface. The wafer's 70° conical under head area does not extend to the outer edge of the head, providing a bearing surface of 16° around the circumference of the under-head. Preferred head style for self-drilling screws. Provides the necessary bearing surface and flush fit in wood and softer materials. The head/shank fillet is contoured to strengthen the under head area.  

.

.

BINDING HEAD SCREWS

BINDING HEAD

Binding head screws also called Binder head screws, have a head that is similar to a pan head but much thicker with a deeper slot. Binder head screws feature a larger bearing surface than pan head screws and when torque is applied have a better surface grip. Some Binding head screws have an undercut under the head that acts as a locking mechanism.  

 

.

.

.

TEE BOLT 

TEE BOLTS

 

Tee bolts are different to T slot bolts but serve a similar purpose. They are a threaded fastener designed to sit in a matching slot. Tee bolts are made from 12.9 material with the grade forged into the head along with the manufacturer's identification. Because of the high grade they are not plated and are finished with a black oxide oil quenched coat for minor corrosion resistance but primarily for lubricity as the tee bolt moves in the matching slot.

.

.

.

.

.

.

CUP SQUARE COACH BOLT

CUP SQUARE

Coach bolts should not be confused with Coach screws that have a square or hexagon head and a wood screw thread. Coach bolts also called carriage bolts have a history that goes back to the horse and carriage and have a round head with no drive and a square section under the head to locate in a wooden hole. These bolts were designed for use with iron strengthening plates on either side of a wooden beam, today they are often used with bare timber and a square washer to spread the load.